LOWCEMENT GUNNING CONCRETES
Until today, we have been providing solutions for all kinds of furnaces at industrial facilities such as Iron and Steel, Cement, Aluminum, Refinery and Chipboard Factories by using high strength low cement or self-flow concrete with high abrasion resistance against chemical / physical interaction, erosion and raw material fermentation. However, it is not possible to build formworks and pour concrete in some areas. Moreover, pouring concrete by vibration and building formworks are time-consuming and challenging procedures that require extra workmanship. For such cases, we have achieved a solution by placing Dilation Forms instead of building formworks and performing Ano Gunning Concrete applications.
The gunning concrete applications in the recent years have increased their market share by means of their fast and relative lining technique. The gunning concretes produced until today were traditional mid cement concrete and could avoid chemical and physical abrasion thanks to the composition of the aggregates used. Furthermore, a considerably high performance was achieved in the strength values of gunning concrete compressed under high pressure. However, it has never been possible to reach the performance of L.C.C. concrete with the gunning concrete. L.C.C. provided high performance, yet resulted in delays due to difficulties in the building of formworks and application; also, the dry out issues arising from the dense composition of the concrete brought along the risks of bursting, shock and cracking. For all of these reasons, Remsan developed Low cement Gunning Concrete which can eliminate all the difficulties experienced in L.C.C. applications and meet the performance of L.C.C. concrete.
Our REMLOWGUN low cement gunning concrete family has a composition that is no different from low cement cast concrete thanks to its chemical binders. Furthermore, they have a less dense composition than cast type concrete. As there is no requirement to use formworks, the concrete enables easy water discharge by the performance of trimming and rodding without waiting for the settlement of concrete. By means of easily performed wet out, lest exothermic reactions are encountered during settlement.
AREAS OF USE:
Our REMLOWGUN low cement gunning concrete can be used on every area where the use of gunning method is possible. It is particularly preferred in areas of application difficulty where low cement cast concrete must be used.
• In torpedo cars, coke batteries, nozzle and schnorkel repairs, tundish and ladle repairs in Iron and Steel plants.
• In Inlet Chamber ramps, furnace entrance belts, cooler roofs and elbow fillings, tertiary pipes, etc. in cement factories.
• Areas of friction on furnaces with fluidized beds.
• Areas of sawdust friction in chipboard factories.
JUST SPRAY YOUR LOW CEMENT, HIGH STRENGTH GUNNING CONCRETE WITHOUT FORMWORKS AND VIBRATION APPLICATION AND ELIMINATE ALL TROUBLES.
- REMLOWGUN 50
- REMLOWGUN 60
- REMLOWGUN 60 SiC
- REMLOWGUN 60 SiC 5
- REMLOWGUN 60 SiC 10 GG
- REMLOWGUN 60 SiC SPC ZR
- REMLOWGUN 70 ZR
- REMLOWGUN SP ZR
- REMLOWGUN 70 SiC SPC ZR
- REMLOWGUN 75
- REMLOWGUN 85
- REMLOWGUN 90
- REMLOWGUN 90 SiC SPC